Trackpad Control Module Serial Number
How to Find and Enter the Trackpad Control Module Serial Number
If you are using a Macbook Pro or Air with Windows 7 installed, you might want to use the Trackpad++ driver and control module to enhance the performance and functionality of your trackpad. Trackpad++ is the world's first alternate Windows 7 driver for an Apple Multitouch Trackpad. It offers many benefits over the native Boot Camp driver, such as improved scrolling, multitouch gestures, pointer ballistics, and more. However, to use Trackpad++, you need to find and enter the trackpad control module serial number. This article will show you how to do that.
What is the Trackpad Control Module Serial Number?
The trackpad control module serial number is a unique identifier that is assigned to each trackpad device by the manufacturer. It is usually printed on a sticker or engraved on the back of the trackpad. The serial number consists of a series of numbers and letters, such as 101040-104733 or 8041-81081. You need to enter this serial number when you install or update the Trackpad++ driver and control module. This is a security measure to prevent unauthorized use of the software.
Download File: https://urluso.com/2w34JP
How to Find the Trackpad Control Module Serial Number?
To find the trackpad control module serial number, you need to access the back of your trackpad device. Depending on your Macbook model, this may require removing some screws or opening some latches. You can follow these steps to find the serial number:
Turn off your Macbook and unplug it from any power source.
Flip your Macbook over and locate the battery compartment. If your Macbook has a removable battery, slide the latch and remove the battery. If your Macbook has a non-removable battery, use a screwdriver to unscrew the bottom case.
Look for a sticker or an engraving on the back of the trackpad. It should have a barcode and a serial number. Note down the serial number or take a picture of it with your phone.
Replace the battery or the bottom case and turn on your Macbook.
How to Enter the Trackpad Control Module Serial Number?
To enter the trackpad control module serial number, you need to run the Trackpad++ installer or updater. You can download it from [here]. You can follow these steps to enter the serial number:
Run the Trackpad++ installer or updater as an administrator.
Follow the instructions on the screen until you reach the screen that asks for the trackpad control module serial number.
Type in or paste the serial number that you found on the back of your trackpad. Make sure you enter it exactly as it appears, including any dashes or spaces.
Click Next and continue with the installation or update process.
Troubleshooting Tips
If you encounter any problems with finding or entering the trackpad control module serial number, you can try these tips:
If you cannot find the sticker or engraving on your trackpad, you can try looking for it on other parts of your Macbook, such as under the keyboard, near the hinges, or inside the CD/DVD drive slot.
If you cannot read the serial number due to wear and tear, you can try using a magnifying glass, a flashlight, or a scanner app on your phone to enhance its visibility.
If you enter an incorrect or invalid serial number, you will see an error message on the screen. Make sure you enter it correctly and try again. If you still get an error message, contact [Trackpad++ support] for assistance.
Conclusion
The trackpad control module serial number is an important piece of information that you need to use Trackpad++ on your Macbook with Windows 7. It is usually located on the back of your trackpad device and consists of a series of numbers and letters. You need to enter it when you install or update the Trackpad++ driver and control module. If you have any trouble finding or entering it, you can follow the steps and tips in this article or contact Trackpad++ support for help.